Crestron C2N-DAP8RC Specifications download pdf (Page 61)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control

Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 57

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a

PRO2 control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

4. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the respective Operations Guide for the control system.

Uploading a SIMPL Windows Program

A control system source file has

the extension .smw. A compiled

SIMPL Windows file has the

extension .spz for a 2-Series

control system.

The SIMPL Windows file can be uploaded to the control system using SIMPL

Windows or via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 55 has been performed.

2. As shown after this step, select File Transfer | Send Program

(alternatively, press Alt+P) from the Viewport menu.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

No comments

Crestron C2N-DAP8RC Specifications Page 61