Crestron C2N-DAP8RC Specifications download pdf (Page 9)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control

Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 5

Parametric Equalizer

The parametric equalizer consists of eight channels (one for each speaker) of six

bandpass filter sections that permit you to correct for acoustic anomalies in the

listening area or in the speakers themselves, and/or to establish preset values that

enhance the sound conditions for favorite music or recording types.

The six bands are identical in function. Each delivers up to 12 dB of boost or

attenuation, has an adjustable bandwidth control (from .02 octaves to 2 octaves), and

a center frequency control range from 10 Hz to 20 kHz. Use each band anywhere in

the audio spectrum, not just pre-selected ranges as typically found on graphic

equalizers. In addition, you can select from among five filter types (low pass, high

pass, EQ filter, bass shelf, and treble shelf) or select no filter.

Room Control Options

The C2N-DAP8RC also functions as a Cresnet

room control interface to local AV

and other devices such as TVs, projectors, VCRs, and DVD players. The unit may

receive video and digital audio from the Crestron CNX-PVID8, as well as analog

audio from the CNX-BIPAD8, all via CAT5 cabling. In addition, it receives video,

digital audio and analog audio from local sources via standard RCA connections.

The unit’s built-in audio/video matrix switcher distributes these inputs to local

outputs.

One bi-directional RS-232 and four IR ports are provided. A current sensor input

accepts power status feedback from the optional CNXRMCS current sensor

(available separately). In addition, a powered IR input allows connection of the

optional CNXRMIRD IR sensor (available separately) to receive IR commands from

a Philips Pronto

with RC5 commands or a similar universal remote control, which

may be programmed to control any device connected to the Cresnet system.

Naturally, any Crestron touchpanel or pushbutton control panel may be used with the

C2N-DAP8RC as well.

Finally, the unit provides outputs for directing video and analog audio back to the

head end.

Specifications

The following table summarizes the specifications for the C2N-DAP8RC.

C2N-DAP8RC Specifications

SPECIFICATION DETAILS

Power Requirements 21 Watts (0.875 Amp @ 24 VDC)

Default Net ID 50

Control System Update Files

1, 2

2-Series Control System

Update File

Version 3.044.CUZ or later

C2N-DAP8RC Firmware C2N-DAP8RC.1.04.44d.upg or later

Audio I/O

AUDIO

S/PDIF – A, B

OPTICAL – C, D

AUDIO IN – 2 to 6

RJ-45 Stereo differential I/O – Connects to CNX-BIPAD8

2 RCA connectors for coax digital input (S/PDIF)

2 Toslink fiber optic inputs (S/PDIF)

10 RCA connectors for 5 local stereo input sources

Input level = 2.5 V

RMS

Input impedance = 50K Ohms

(continued on next page)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 79 80

Comments to this Manuals

No comments

Crestron C2N-DAP8RC Specifications Page 9

Comments to this Manuals

Related products and manuals for Soundbar speakers Crestron C2N-DAP8RC