Crestron C2ENET-2 Specifications download pdf (Page 28)

Digital Graphics Engine Crestron DGE-2

Touch Screen

The Touch Screen button opens the “Touch Screen Settings” window, which

provides access to touch screen calibration when Calibrate Touch Screen… is

touched.

“Touch Screen Settings” Window

To view the mouse cursor on the touch screen, select On in the Mouse Cursor

section of the window. The mouse cursor is displayed only if a mouse is connected

to the touch screen.

When Calibrate Touch Screen… is touched, the “Touch Device Configuration”

window opens.

“Touch Device Configuration” Window

Touch the device Type, then touch Calibrate to initiate calibration. Touch Detect to

search for attached touch devices.

When Calibrate is touched, the calibration screen is displayed. Touch the screen to

begin the calibration process. If the screen is not touched within sixty seconds, the

calibration sequence stops and the screen returns to the “Touch Screen Settings”

window.

If the screen is touched before the sixty second timeout, the screen instructs the user

to touch the center of each target as it appears. There is a series of crosshairs on the

screen, starting near the upper left corner. Touch the center of the first crosshair to

24 • Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 Operations Guide – DOC. 6809E

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

No comments

Crestron C2ENET-2 Specifications Page 28