Crestron C2ENET-2 Specifications download pdf (Page 31)

Crestron DGE-2 Digital Graphics Engine

Update Panel

The Update Panel button permits the selection of the touch screen program, a .vtz

file. It is also used to upgrade firmware.

The Project tab of the “Project and Firmware” window is divided into two sections:

Current Loaded Project and Load New Project.

In the Target Location to Load the Project to section, the location where the

uncompressed project files are stored can be chosen. The default file location is the

internal flash.

In the Load New Project section, touch Browse and select the compiled project (i.e.,

the .vtz file) to be loaded from a network drive, USB device or flash drive, then

touch Open to show the source file in the “Project and Firmware” window. Touch

Load to uncompress the project file, place it in the destination selected in Target

Location to Load the Project to and display it on the touch screen.

NOTE: If there is a mapped network drive on the touch screen, the first time

Browse is selected, it may take some time for the “Open” window to appear.

NOTE: When selecting Browse, the contents of the “Recent” folder is not

available.

NOTE: Projects can also be loaded via Crestron Toolbox.

NOTE: If External is checked, the display list cannot be viewed via Crestron

Toolbox.

NOTE: When loading a project to an external storage device (e.g. MMC card or

flash drive, a subdirectory (not the root) must be used as the working path.

Otherwise, the upload may fail.

“Project and Firmware” Window – Project Tab

Operations Guide – DOC. 6809E Digital Graphics Engine with DigitalMedia™ CAT Connectivity: DGE-2 • 27

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

No comments

Crestron C2ENET-2 Specifications Page 31