Crestron CN-TVAV Specifications download pdf (Page 16)

Programmable TV/AV Controller Crestron CN-TVAV

12 •• Programmable TV/AV Controller: CN-TVAV Operations Guide - DOC. 5722B

NOTE: Refer to the latest revision of the STIRP Installation Instructions (Doc.

5674) for details to attach the STIRP near the IR sensor window of the TV or AV

device. This document can be obtained from the Products page (PRODUCT

MANUALS section, hardware section) or Downloads page (MANUAL Library) of

Crestron’s website (www.crestron.com). Search for STIRP.PDF. New users are

required to register in order to obtain access to the FTP site.

NOTE: The power plug is used to connect or disconnect power from the unit. Other

than making the power connection last, complete the connections in any order.

NOTE: An optional Crestron handheld IR transmitter must have an unobstructed

line-of-sight to the IR receiver of the CN-TVAV. Make sure nothing is between the

transmitter and the CN-TVAV that would prevent maximum signal reception.

Typical Connections for Normal Operation

CRESNET RS-232

6.6A MAX

50-60HZ

115 VAC

POWER OUT 6A MAX

POWER IN

I/O

1 2 3 4 G

TO STIRP OR

OTHER IR DEVICE

TO VAC

OUTLET

TO CRESNET PERIPHERALS

(DURING MIXED MODE) OR

HOST CONTROL SYSTEM

(REMOTE OR MIXED MODE)

TO TV OR

AV DEVICE

TO OTHER

PERIPHERALS

CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA

TO RS-232

PERIPHERALS

Identity Code

Every equipment and user interface within the Cresnet network requires a unique

identity code (NET ID). These codes are recognized by a two-digit hexadecimal

number from 03 to FE.

When used in the Remote Processing Mode or Mixed Processing Mode, each

CN-TVAV in the Cresnet system needs a NET ID that matches an ID code specified

in the SIMPL Windows program. The NET ID of the CN-TVAV is factory set to 50.

The NET IDs of multiple units must all be unique and changed from a PC via

SIMPL Windows or VisionTools™ Pro-e (VT Pro-e).

NOTE: VT Pro-e is a Windows compatible software package for creating Crestron

touchpanel screen designs.

The method for changing the unit’s NET ID is identical regardless of the software

chosen. Complete the following steps to change the NET ID.

1. Attach one of the CN-TVAVs to the control system (verify that the

software is running).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments

Crestron CN-TVAV Specifications Page 16

Comments to this Manuals

Related products and manuals for TVs & monitors Crestron CN-TVAV