Crestron TPS-1700 Specifications download pdf (Page 13)

Crestron TPS-1700 Isys

™

Wired 5.7 Inch Tabletop Touchpanel

Operations Guide - DOC. 6117 Isys

™

Wired 5.7 Inch Tabletop Touchpanel: TPS-1700 • 9

Hardware Hookup

CAUTION: Do not apply excessive pressure to the touchscreen display during

handling. Doing so can crack the screen and damage the touchpanel.

The TPS-1700 touchpanel has rubber pads on the underside of its base so that it can

rest on a horizontal surface. The only connection necessary is made to the 6-pin

RJ-11 connector mounted in the bottom of the unit base. The Crestron CN-RJ11 4

Wire to RJ11 Converter and a 12-foot interface cable are supplied to convert a 4-pin

Cresnet connection on the control system to the 6-pin connection in the touchpanel.

The following figure shows the pinout for the 6-pin RJ-11

Recommended Touchpanel Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could

degrade optical properties. Long-term contact with abrasive materials can scratch the

surface that may detrimentally affect image quality.

For best cleaning results, use a clean, damp, non-abrasive cloth with any

commercially available non-ammonia glass cleaner. Surrounding plastic enclosure

may not provide a complete watertight seal. Therefore, apply cleaning solution to the

cloth rather than the surface of the touchscreen. Wipe touchscreen clean and avoid

ingress of moisture beneath panels.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Crestron TPS-1700 Specifications Page 13