Crestron TPS-1700 Specifications download pdf (Page 26)

Isys

™

Wired 5.7 Inch Tabletop Touchpanel Crestron TPS-1700

22 • Isys

™

Wired 5.7 Inch Tabletop Touchpanel: TPS-1700 Operations Guide - DOC. 6117

Uploading a VT Pro-e Project

The TPS-1700 touchpanel

source file has the extension

.vtp. A compiled VT Pro-e file

has the extension .vtz.

The VT Pro-e file can be uploaded to the touchpanel using VT Pro-e or via the

Crestron Viewport.

Upload via VT Pro-e

1. Start VT Pro-e.

2. Select File | Open | Project to view the “Open” window, navigate to

the VT Pro-e file (.vtp), and click Open.

3. Select File | Upload Project.

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 18 has been performed.

2. As shown after this step, select File Transfer | Send Touchpanel

(alternatively, press Alt+T) from the Viewport menu.

File Transfer | Send Touchpanel Command

3. As shown after this step, select the NET ID of the TPS-1700

touchpanel and then click OK. The “Touch Panel Transfer” window

appears (refer to graphic on next page).

“Select Network ID” Window

NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the

port speed baud rate to 38400 to match the Cresnet bus speed.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

No comments

Crestron TPS-1700 Specifications Page 26