Crestron TPS-1700 Specifications download pdf (Page 24)

Isys

™

Wired 5.7 Inch Tabletop Touchpanel Crestron TPS-1700

20 • Isys

™

Wired 5.7 Inch Tabletop Touchpanel: TPS-1700 Operations Guide - DOC. 6117

“Port Settings” Window

5. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the respective Operations Guide for the control system.

Uploading a SIMPL Windows Program

A control system source file has

the extension .smw. A compiled

SIMPL Windows file has the

extension .spz for a 2-Series

control system, .bin for CNX

generation, and .csz for CNX

generation with SIMPL+.

The SIMPL Windows file can be uploaded to the control using SIMPL Windows or

via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 18 has been performed.

2. As shown after this step, select File Transfer | Send Program

(alternatively, press Alt+P) from the Viewport menu.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Crestron TPS-1700 Specifications Page 24