Crestron QM-RMCRX-BA Specifications download pdf (Page 21)

Crestron QM-RMCRX-BA QuickMedia™ Receiver/Processor

Mounting Positions of the Four Included Mounting Brackets

NOTE: The MK-QM-RMCRX mounting kit is available for mounting the

QM-RMCRX-BA to a pipe. Details can be found in the latest version of the

MK-QM-RMCRX Installation Guide (Doc. 6247).

Hardware Hookup

Refer to the following hookup diagram and, aside from attaching power last,

complete the connections in any order.

NOTE: To prevent overheating, do not operate this product in an area that

exceeds the environmental temperature range listed in the specifications table.

Consideration must be given if installed in a closed or multi-unit rack assembly

since the operating ambient temperature of the rack environment may be greater

than the room ambient. Contact with thermal insulating materials should be

avoided on all sides of the unit.

NOTE: The maximum continuous current from equipment under any external

load conditions shall not exceed a current limit that is suitable for the minimum

wire gauge used in interconnecting cables. The ratings on the connecting unit's

supply input should be considered to prevent overloading the wiring.

Operations Guide – DOC. 6332 QuickMedia™ Receiver/Processor: QM-RMCRX-BA • 17

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

No comments

Crestron QM-RMCRX-BA Specifications Page 21