Crestron QM-RMCRX-BA Specifications download pdf (Page 24)

QuickMedia™ Receiver/Processor Crestron QM-RMCRX-BA

• Change serial numbers.

• Run scripts to automate tasks.

• Perform system diagnostics, and much more.

The Crestron Toolbox allows you to perform these functions using simple

graphical views and click and drag methods.

Communication Settings

Establishing communications is an essential step when setting up the control

system. Once communications are established with the control system, you can

upload programming, update firmware, and use all the diagnostic tools available

in Crestron Toolbox.

Communications can be established using a serial (RS-323) connection, or by

using a TCP/IP connection. For additional connection details, refer to

“Establishing Communications with the Control System” in the latest version of

the 2-Series Control Systems Reference Guide, Doc. 6256.

The following connections are unique to the QM-RMCRX-BA.

Serial Connection

Connect the COM B port on the QM-RMCRX-BA

control system to one of the COM ports (usually

COM 1) on the PC. The QM-RMCRX-BA requires

the use of a null-modem RS-232 cable with DB9

female connectors on both ends. Most c

available cables are acceptable; they should have at

least five pins for transmit, receive, ground, and

hardware handshaking (pins 2, 3, 5, 7 and 8).

ommercially

Typical Serial Connection

Pins

Null Modem Cable

1. Open Crestron Toolbox and click Tools | Manage Address B to ook

display the communications settings. Enter the new address name, and

then click RS-232 as the connection type.

20 • QuickMedia™ Receiver/Processor: QM-RMCRX-BA Operations Guide - DOC. 6332

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

No comments

Crestron QM-RMCRX-BA Specifications Page 24