Crestron QM-RMCRX-BA Specifications download pdf (Page 17)

Crestron QM-RMCRX-BA QuickMedia™ Receiver/Processor

RELAY OUTPUT

Two 2-pin isolated relay connectors are provided for controlling low voltage

contact closure devices such as drapes, screens and lifts. Each connector is

rated 2 A @ 50 V.

Indicators

The QM-RMCRX-BA front panel indicators are described as follows.

QM LINK

This LED indicates an established QuickMedia link.

COM A

This red LED indicates COM A port activity.

COM B

This red LED indicates COM B port activity. Constant blinking indicates that

the port is used for remote console connection.

This red LED indicates IR port activity.

INPUT

This red LED indicates input activity.

PWR (Power)

This green LED illuminates when the unit is connected to and receives 24 VDC

power from an external power pack or from Cresnet.

ACT (LAN)

This yellow activity LED illuminates when the QM-RMCRX-BA detects

Crestron Ethernet traffic (i.e., XPanel™).

NET (Cresnet)

This yellow LED illuminates when the QM-RMCRX-BA communicates with

Cresnet devices on the network, and also indicates that the SIMPL Windows

program currently loaded has a network device defined at the same network ID

as the QM-RMCRX-BA.

Reset Buttons

Two buttons are provided on the front panel of the QM-RMCRX-BA. Refer to

the following descriptions.

HW-R

Pressing this button initiates system hardware reset. (Same effect as

disconnecting and reconnecting power.)

Operations Guide – DOC. 6332 QuickMedia™ Receiver/Processor: QM-RMCRX-BA • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

No comments

Crestron QM-RMCRX-BA Specifications Page 17