Crestron QM-RMCRX-BA Specifications download pdf (Page 49)

Crestron QM-RMCRX-BA QuickMedia™ Receiver/Processor

COM Port Signals (continued)

SIGNAL TYPE

AND NAME

DESCRIPTION

Digital input

Not implemented - reserved for future.

Optional digital input

<dtr>

Activates the DTR (Data Terminal Ready) pin on the COM port for as long as the

input is high.

High/1 (level sensitive) = Activate DTR pin

Low/0 = Release DTR pin

Optional digital output

<dsr>

Indicates that the DSR (Data Set Ready) pin on the COM port has been activated.

The output remains high for as long as the DSR pin is activated.

High/1 = DSR pin activated

Low/0 = DSR pin released

Parameters

Defines a string literal that will be transmitted out of the COM port.

Optional parameter

Appends the specified characters to every <str#> string.

For example, if a protocol requires that all strings to and from a device have a

carriage return/linefeed, then <delimiter> can be

"\x0D\x0A".

The delimiter applies to incoming and outgoing strings.

Digital output

This line indicates an established a carrier with a remote device.

Digital output

The ring indicator tells the software that a remote device is calling.

Slot 4: C2QENET-1: C2ZQ-Ethernet

The C2QENET-1 built-in network interface card provides one LAN port with an

RJ-45 connector for connecting the QM-RMCRX-BA to the Ethernet network.

NOTE: C2N-NPA8 is not supported.

The card provides 252 IP IDs for Ethernet devices. No symbol is shown, as no

detail is required.

Slot 5: Cresnet: C2Net-Device

The C2Net-Device slot enables the QM-RMCRX-BA to control up to 252

Cresnet devices. Each Cresnet device is assigned a unique identifier called a Net

ID, which is a hexadecimal value ranging from 03 to FE.

To view the list of supported devices, expand the control system in the bottom

pane of System Views and double-click the C2Net-Device slot, the desired Net

ID, or right-click and select Add Item from the submenu. Then select the device

you want to add. Alternatively, you can drag the device from the Cresnet

Control Modules folder onto the Net ID. Supported devices include network

control modules, lighting modules and a variety of Crestron wired touchpanels.

In Program Manager, the C2Net-Device symbol contains no signals; to program

a controlled Cresnet device, expand C2Net-Device in Program View. Then drag

each device to Detail View.

Operations Guide – DOC. 6332 QuickMedia™ Receiver/Processor: QM-RMCRX-BA • 45

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Comments to this Manuals

No comments

Crestron QM-RMCRX-BA Specifications Page 49

Comments to this Manuals

Related products and manuals for Receiver Crestron QM-RMCRX-BA