Crestron QM-RMCRX-BA Specifications download pdf (Page 6)

QuickMedia™ Receiver/Processor Crestron QM-RMCRX-BA

The QM-RMCRX-BA processes standard video (i.e., DVD, VCR, camera

video), RGB video and audio signals through its proprietary QuickMedia

transport port.

The QuickMedia connection port is a revolutionary signal processing system

that allows for transmitting and receiving any signal type (including video,

audio, computer and microphone signals) via CAT5E type cable. A QuickMedia

Wall Plate (QM-WMC), QuickMedia FlipTop box, or QuickMedia Transmitter

(QM-TX) converts these signals from analog to digital and transmits them to a

QM-RMCRX-BA receiver using a CAT5E cable. The QuickMedia receiver

performs frequency compensation on each twisted pair video input to maintain

correct operation.

The QM-RMCRX-BA then converts each of those signal types back to standard

analog signals for connection to a display (projector or flat-panel monitor), an

audio amplifier, or if using the on-board amplifier, directly to speakers.

QM-RMCRX-BA outputs include:

• RGBHV

• Composite video

• S-video

• Two balanced/unbalanced line audio outputs or an balanced/unbalanced

stereo (left & right) line output

• One balanced/unbalanced line-level speech output

• One 20-watt stereo output (10 W per channel), with built-in volume,

bass and treble controls

The QM-RMCRX-BA QuickMedia Receiver/Processor features onboard

professional digital audio processing, with volume and tone control, 12-band

graphic/parametric equalization, and up to 40 ms of delay for speech audio.

The onboard mic mixer can mix the two remote microphones with stereo

program signals in any proportion, so the sound is always precisely tailored to

the listening environment.

All the audio features of the QM-RMCRX-BA are easily configurable using

Crestron SystemBuilder™ software. Using the sliders, you can adjust EQ filters

and presets, input/output gain, and mixing levels. Select real time mode to hear

the sound as it is adjusted and then create a configuration file ready to be

uploaded to the QM-RMCRX-BA.

Video signals received by the QM-RMCRX-BA are applied to the display

device via the RGBHV, S-video, and composite video ports. Each video output

port is switched for signal selection to match the selected input source of the

QuickMedia transmitter (sold separately). The display device can also be

addressed via the COM port to activate only the input of interest. Audio path

routing is accomplished via mixer schemes. Refer to the following block

diagram.

2 • QuickMedia™ Receiver/Processor: QM-RMCRX-BA Operations Guide - DOC. 6332

1 2 3 4 5 6 7 8 9 10 11 ... 75 76

Comments to this Manuals

No comments

Crestron QM-RMCRX-BA Specifications Page 6

Comments to this Manuals

Related products and manuals for Receiver Crestron QM-RMCRX-BA